5 Basic Roof Framing Tips

by Editor on September 12, 2013

roof framing

Many homeowners are not at all confident about their abilities to do home repairs on their own, at least to some degree, but they can count on the work of Chase Construction North West to help them. You might be totally stoked to discover that you can stop a faucet from leaking by replacing a 10-cent gasket and adding some plumber’s tape around the fittings. Or you might give yourself a big pat on the back for taking the initiative to putty holes left in walls by nails, and then actually follow through with sanding and painting in the aftermath. Now, some people are a lot handier when it comes to home maintenance and repairs, replacing wax rings in toilets, flushing the water heater annually, and even installing upgrades like wood or tile flooring. But when it comes to framing a roof, you might find yourself a bit out of your depth. Never fear, though. Barring disabilities, one person is basically capable of what another person is, so you should be able to frame your roof if you so choose, especially with a few tips and tricks under your belt. At the very least, though, knowledge of the framing process can help you to ensure that your contractor does a good job. So here are a few basic framing tips every homeowner should know.

Take stock. If you have to replace your entire roof, the place to start is by taking stock of the house it’s going to sit on. This means making sure that the structure of your home is stable and ready to support a new roof and that all walls are planed and squared. If you find that this is not the case, you may have to do some prep work before you can actually start framing your roof.

Draw plans. Although pretty much everyone understands the basic structure of a roof, that doesn’t mean you can just start nailing boards into triangles over your house without so much as a thought to how you’re going to progress from rooflessness to a finished framework that will support your roofing materials. Architectural plans, complete with precise measurements, are a must if you want a roof that’s going to stand the test of time.

Purchase materials. Once you’ve got your plans in place you’re going to have to purchase materials with which to build your roof frame, and these will include wooden beams and hardware to hold them together. Of course, you’ll also need tools for cutting and joining beams. This is where the process can start to get a bit tricky, and if you’ve never done any kind of carpentry or building projects before, you can quickly get overwhelmed with the details.

Understand building codes. One area where most homeowners get into trouble is following building codes, not to mention getting permits for the work they’re doing on their homes. In this respect, hiring a pro can save you a lot of time, trouble, and money in the long run since your contractor should be well aware of any applicable codes and permits needed for your job. But that doesn’t mean you can’t figure it out on your own with a trip to the city or county planning office. If you’re not sure how to find it, try looking at city pages on the web or calling directory assistance.

Get help. Whether you hire a roofing company like Taves roofing LTD or opt to go with a private contractor, you may at some point concede that you need help with your home improvement project, and it’s better if you discover this sooner rather than later. After all, you don’t want to waste time and money creating a problem that you then have to pay someone else to correct before work on your new roof can even begin.

photo by: wayupnorth2010

Comments on this entry are closed.

Previous post:

Next post: